GALDEN HT110 Semiconductor Cooling Liquid
Galden® HT110 is a high-performance, electronic-grade heat transfer fluid in Syensqo’s (formerly Solvay’s) Galden® PFPE perfluoropolyether product range. It is an inert, electrically insulating thermal management fluid with excellent dielectric properties, thermal stability, and chemical inertness. With a boiling point of approximately 110°C, it can operate reliably across a wide temperature range and is suitable for both vapor-phase and liquid-phase thermal management systems. The product is designed for thermal management applications under demanding conditions and can maintain stable performance from approximately -100°C to elevated temperatures, while offering good material compatibility and long-term stability.
Product Details
Product Features
PFPE perfluoropolyether structure with high chemical inertness
Excellent dielectric properties for electronic-grade insulating environments
Stable performance across a wide temperature range
Non-flammable with no flash point, providing a high level of operational safety
High cleanliness with no residue and no corrosive effect on materials
Good compatibility with metals, plastics, and elastomers
Low moisture absorption and stable long-term performance
Applicable Industries / Equipment
Semiconductor and Electronics Manufacturing: Wafer fabrication temperature-control equipment, chip packaging and test systems, electronic component burn-in equipment, semiconductor reliability test systems, and IC testing and screening equipment.
Data Centers and High-Performance Computing: Immersion cooling systems, AI server cooling systems, high-power GPU/CPU thermal management systems, and liquid cooling systems for supercomputers.
Industrial Thermal Management and Temperature-Control Equipment: Chillers, thermostatic baths, heat exchange systems, reactor temperature-control equipment, and precision industrial thermal control platforms.
Laboratory and Scientific Research Equipment: Material thermal-property test equipment, environmental simulation systems, constant-temperature reaction systems, and vacuum thermal test systems.
High-End Industrial and Specialized Applications: Aerospace electronic test systems, nuclear-industry cooling systems, pharmaceutical equipment, and high-reliability industrial test equipment.
| Property | HT110 |
|---|---|
| Boiling Point | 110 ℃ |
| Pour Point | -100 ℃ |
| Density | 1.71 g/cm³ |
| Kinematic Viscosity | 0.77 cSt |
| Vapor Pressure | 17 torr |
| Specific Heat Capacity | 0.23 cal/g· |
| Latent Heat of Vaporization (Near Boiling Point) | 17 cal/g |
| Refractive Index | 1.28 |
| Coefficient of Thermal Expansion | 0.0011 cm³/cm³·℃ |
| Surface Tension | 16 dyne/cm |
| Thermal Conductivity | 0.065 W/m·K |
| Dielectric Strength（2.54 mm gap） | 40 kV |
| Dielectric Constant | 1.92 |
| Volume Resistivity | 1.5×10¹⁵ Ohm·cm |
| Average Molecular Weight | 580 amu |
| Dissipation Factor（1 KHz） | 210⁻⁴ |
| Water Solubility | <10 ppm (wt) |
| Air Solubility | 26 cm³ gas/100 cm³ liquid |
Taihei Kasei HVF-1
Taihei Kasei EIGHT SEAL AC-505
YCI K-100
Fomblin® M15 PFPE
Fomblin® M30 PFPE
Fomblin® M60 PFPE
Fomblin® Z03
Fomblin® Z25 PFPE
Fomblin® Z15
Galden® D02 PFPE
Galden® D02TS PFPE
