CEMEDINE Excel-EPO Transparent Two-Part Epoxy Adhesive
CEMEDINE Excel-EPO is a two-part room-temperature-curing transparent epoxy resin adhesive. CEMEDINE classifies it as a 10-minute transparent type. The base is epoxy resin and the hardener is polythiol, with both components supplied as colorless transparent liquids. The two components are mixed at a 1:1 ratio. At 23°C, the pot life is approximately 10 minutes, and practical handling strength is reached in approximately 1 hour. After curing, it forms a hard transparent adhesive layer suitable for applications where appearance is important. Excel-EPO also offers good heat, water and chemical resistance. CEMEDINE’s consumer product page lists heat resistance of approximately 80°C and recommends the product for metals, ceramics and rigid plastics.
Product Details
Product Features
Transparent Finish:Both the base and hardener are colorless and transparent, providing a clean finished appearance.
10-Minute Type:Approx. 10 minutes of usable working time at 23°C.
Room-Temperature Cure:No heating equipment is required for curing.
Heat, Water & Chemical Resistance:Suitable for applications requiring resistance to heat, moisture and chemicals.
Low Curing Shrinkage:Reactive solvent-free epoxy system with relatively low shrinkage.
Electrical Insulation:Volume resistivity of approximately 6.2×10¹³ Ω·cm.
Product Applications
Metal Bonding:Bonding and repairing metal models and small metal parts.
Ceramics:Repair and assembly of ceramic products.
Rigid Plastics:Bonding of rigid plastic components.
Models & Crafts:Suitable for plastic models, metal models and craft products.
Precision Assembly:For small parts requiring a clear adhesive layer and low curing shrinkage.
Fishing Equipment & DIY Repair:CEMEDINE also lists fishing equipment, hobby use and repair applications.
| Item | CEMEDINE Excel-EPO |
|---|---|
| Product Type | Two-Part Room-Temperature-Curing Epoxy Adhesive |
| Brand | CEMEDINE |
| Model | Excel-EPO |
| Grade | 10-Minute / Transparent Type |
| Base Resin | Epoxy Resin |
| Hardener | Polythiol |
| Base Appearance | Colorless Transparent |
| Hardener Appearance | Colorless Transparent |
| Base Viscosity | 20 Pa·s at 23°C |
| Hardener Viscosity | 20 Pa·s at 23°C |
| Base Density | 1.14 g/cm³ |
| Hardener Density | 1.13 g/cm³ |
| Mixing Ratio | Base:Hardener = 1:1 |
| Pot Life | Within 10 min at 23°C |
| Time to Practical Strength | Approx. 1 hour at 23°C |
| Cured Hardness | Shore D 78 |
| Glass Transition Temperature | 46°C |
| Water Absorption | 2.3% |
| Coefficient of Linear Expansion | 8.3×10⁻⁵ /K |
| Volume Resistivity | 6.2×10¹³ Ω·cm |
| Approx. Heat Resistance | Approx. 80°C |
| Packaging | 15 g Set |
| Product Code | CA-121 |
CEMEDINE SUPER X NO.8008
CEMEDINE SUPER X NO.8008L Low-Viscosity Elastic Adhesive
CEMEDINE SUPER X NO.8008L NEO Elastic Adhesive
CEMEDINE SUPER X NO.8008LL
CEMEDINE 3000RS Medium-Viscosity Instant Adhesive
CEMEDINE EP001K Elastic Epoxy Adhesive
CEMEDINE EP330 Two-Part Mixed Type Epoxy Adhesive
