CEMEDINE SUPER X NO.8008L Low-Viscosity Elastic Adhesive
With a viscosity of approximately 22 Pa·s (compared to 85 Pa·s for the standard type), it is much lower than the standard type. It has good application fluidity, can penetrate small gaps or complex structures, and is easy to apply evenly.
Product Details
An epoch-making one-component, room-temperature fast-curing adhesive that integrates three ideal properties: "adhesive bonding", "elastic bonding" and "solvent-free", and is known as the ideal benchmark for adhesives.
Adhesive Bonding
Curing starts upon contact with moisture in the air. It enters the adhesive stage in approximately 10 minutes after application. Bonding at this stage enables instant fixing, eliminating the need for temporary fixing procedures.
One-component, Solvent-free, Room-temperature Fast-curing
Being one-component, solvent-free and fast-curing at room temperature, it ensures convenient, safe and clean application.
Wide Bonding Compatibility
Exhibits excellent bonding performance on various materials such as metals, plastics, rubbers and ceramics, eliminating the need to switch adhesives for different materials.
Durability
As an elastic adhesive, it possesses both "high toughness and flexibility", allowing it to follow the deformation of bonded materials caused by expansion and contraction. It maintains excellent durability in the temperature range from -60℃ to 120℃.
Safety and Reliability
Free of low-molecular-weight cyclic siloxane (Siloxane Free).
Bonding requiring initial fast strength
Bonding of dissimilar materials with different thermal expansion coefficients
Bonding requiring durability such as resistance to thermal cycling (alternating cold and hot conditions)
| Project | Parameters |
| Product Name | SUPER X NO.8008L |
| Main Component | Acrylic modified silicone resin |
| Viscosity（Pa･s/23℃） | 22 |
| Density（g/cm3） | 1.25 |
| Touch Drying Time（23℃） | 11分 |
|
Tensile Shear Bond Strength（MPa） |
3.5 |
|
T-peel Bond Strength（N/mm） |
2.1 |
| Hardness（SHORE A) | 35 |
| Glass Transition Temperature（℃） | -68 |
| Break Strength（MPa） | 1.3 |
| Break Elongation（%） | 320 |
| Volume Resistivity（Ω･cm） | 1.2×10¹² |
| Dielectric Constant(100Hz) | 6.99 |
| Dielectric Tangent（100Hz） | 0.24 |
| Packaging & Capacity Specifications | 170g per pack, 333ml per pack |
TERADA TERADITE TE-7901 Thermally Conductive Flame-Retardant Two-Component Epoxy Potting Resin
TERADA TERADITE TRU-0252K5 Hard-Type UV-LED Curable Functional Resin
TERADA TERADITE TE-7817 High-Thermal-Conductivity High-Heat-Resistance Flame-Retardant Epoxy Potting Resin
TERADA TERADITE TRU-0250K High-Thixotropy High-Heat-Resistance UV Curable Functional Resin
TERADA TERADITE TE-6430 Thermally Conductive Flame-Retardant Two-Component Epoxy Potting Resin
TERADA TERADITE TRU-0251FR High-Tg Flame-Retardant UV Curable Functional Resin
TERADA TERADITE TE-6010GK5 Low-Chlorine High-Heat-Resistance Two-Component Epoxy Resin
TERADA TERADITE TE-6011K Fast-Curing Two-Component Epoxy Resin for Electronic Insulation & Protection
Shin-Etsu Pure Sealant One-Component Low-Volatility Silicone Sealant for Clean Rooms
TERADA TERADITE TE-6311K8 Low-Specific-Gravity Two-Component Epoxy Resin for Electronic Insulation & Protection
TERADA TERADITE TRU-0260K2 High-Specific-Gravity High-Hardness UV-LED Curable Functional Resin
