TERADA TERADITE TE-5111K2 One-Component Low-Shrinkage UV / Heat Dual-Cure Epoxy Resin
A one-component functional epoxy resin for insulation, encapsulation and protection of electronic and electrical components, with both UV and heat curing options.
A one-component functional epoxy resin for insulation, encapsulation and protection of electronic and electrical components, with both UV and heat curing options.
A two-component epoxy resin for insulation and protection of electronic and electrical components, providing high hardness, heat resistance and flame-retardant performance.
An aerosol solid lubricant coating for sliding surfaces, friction areas and mechanical components, designed to reduce friction and wear by forming a solid lubricating film.
A heavy-duty industrial grease for lubricating machine components and preventing seizure, scuffing and wear under high-load and boundary-lubrication conditions.
An industrial grease designed for centralized lubrication systems, machine-tool guideways and dedicated lubrication units used on MAKINO and other industrial machinery.
A multi-purpose spray remover for adhesive residues, sealants, grease, lubricating oil, tar, asphalt, wet paint and other stubborn contaminants.
A dedicated curing agent for EIGHT SEAL AC-505 pre-applied thread sealant, designed to promote crosslinking and formation of a stable sealing film.
A spray-type multi-purpose remover for adhesive residue, tapes, chewing gum, grease, tar, oil stains, wet paint, resin and other stubborn contaminants.
A high-performance fluoropolymer coating and repair compound for sealing, surface protection and repair of chemical equipment, semiconductor cleaning systems, exhaust ducts and precision machinery.
A pre-applied thread sealant for pneumatic, hydraulic and industrial threaded fittings, providing reliable sealing with excellent heat, pressure, oil and chemical resistance.
A long-life lithium complex grease for bearings, gears, centralized lubrication systems and industrial machinery operating under high-temperature, heavy-load and water-exposed conditions.
A high-temperature grease for general industrial equipment, designed to provide stable lubrication and friction protection under elevated-temperature operating conditions.
A medium-viscosity instant adhesive for rapid bonding of rubber, metals, plastics, electrical and electronic parts, offering a good balance between flow and application control.
A low-viscosity instant adhesive designed for rapid bonding of fine wood, decorative wood and wooden craft components, with excellent penetration into narrow joints.
A molybdenum disulfide anti-seize lubricant for threaded joints, pins and high-temperature sliding parts, providing lubrication, wear protection and easier assembly and disassembly under high-temperature and high-pressure conditions.
A medium-high viscosity instant adhesive for rapid bonding of metals, plastics, rubber, electrical parts and precision components, offering fast fixture with improved application control.
A nitrile-modified solvent-based adhesive designed for bonding plasticized PVC to dissimilar materials, with excellent resistance to plasticizer migration.
A low-viscosity instant adhesive for rapid bonding of metals, plastics, rubber, electrical parts and precision components, providing fixture in approximately 5 seconds.
A semi-dry lubricant designed for lubrication, friction reduction and noise prevention on ABS, PC, PS, POM gears, cams, sliding parts and rubber components.
A high-viscosity instant adhesive for rapid bonding of metals, plastics, rubber and precision components, especially suitable where controlled flow and reduced dripping are required.