DEFRIC SPRAY 405 Molybdenum Disulfide Aerosol Solid Lubricant Coating
DEFRIC SPRAY 405 is an aerosol-type solid lubricant coating manufactured by Kawamura Research Laboratories. The official SDS identifies the product as an industrial solid lubricant coating intended for lubrication applications. The formulation contains approximately 8.9% molybdenum disulfide (MoS₂) and 8.9% antimony trioxide, together with synthetic resin and an organic solvent system. Molybdenum disulfide acts as the primary solid lubricant, helping form a lubricating layer on friction and sliding surfaces. The liquid content is gray-black with an organic solvent odor. It has a specific gravity of approximately 1.1 at 20°C and a flash point of approximately -18°C. As a flammable aerosol product, it should be used with adequate ventilation and kept away from heat, sparks and open flames.
Product Details
Product Features
Solid Lubrication: Contains molybdenum disulfide for lubrication of friction and sliding surfaces
Aerosol Application: Convenient spray format for localized and hard-to-reach areas
High MoS₂ Content: Contains approximately 8.9% molybdenum disulfide
Resin-Bonded Coating: Synthetic resin system helps form a solid lubricating coating on the substrate
Suitable for Metal Contact: Designed for mechanical sliding and friction-contact areas
Industrial Grade: Officially designated for industrial lubrication applications
Product Applications
Sliding Components: Lubrication of guides, sliders, pins and similar moving components
Friction Surfaces: Surface treatment of metal contact areas requiring reduced friction and wear
Mechanical Assembly: Lubrication of contact surfaces during equipment and component assembly
Hard-to-Reach Areas: Suitable for narrow or complex areas where grease application is difficult
Equipment Maintenance: Localized lubrication during industrial equipment maintenance and repair
General Industrial Use: Suitable for machinery and components requiring a solid lubricant coating
| Item | DEFRIC SPRAY 405 |
|---|---|
| Product Type | Aerosol Solid Lubricant Coating |
| Recommended Use | Industrial Lubricant |
| Primary Solid Lubricant | Molybdenum Disulfide |
| MoS₂ Content | 8.9 wt% |
| Molybdenum Content | Approx. 5.3 wt% |
| Antimony Trioxide Content | 8.9 wt% |
| Synthetic Resin Content | 1–10 wt% |
| Cyclohexane Content | 19 wt% |
| n-Butanol Content | 10–20 wt% |
| Ethylbenzene Content | 8.3 wt% |
| Xylene Content | 8.3 wt% |
| Dimethyl Ether Content | 20–30 wt% |
| Product Form | Aerosol |
| Liquid State | Liquid |
| Liquid Color | Gray-Black |
| Odor | Organic Solvent Odor |
| Boiling Range | 80.7°C–137°C |
| Flash Point | -18°C |
| Auto-Ignition Temperature | 260°C |
| Vapor Pressure at 20°C | 10.3 kPa |
| Specific Gravity at 20°C | 1.1 |
| Internal Pressure | 0.41 MPa |
| UN Number | 1950 |
| Transport Classification | Class 2.1 Flammable Aerosol |
